Titanium Peta power 10 kva online 3/1
·N+X parallel redundancy, support maximum 4 units in parallel
·Online double conversion with DSP control
·Optimization battery group, the quantity of battery: 16/18/20pcs (32~40pcs supportable)
·Wide input voltage range: 208~478Vac
·Wide input frequency range: 40Hz~70Hz
·Input current harmonic: ＜3%
·Maximum charging current up to 18A (Settable)
·Support 3/1 and 1/1 operation
·Generator compatible
·ECO mode operation for energy saving
·Design with maintenance switch
·Cold start
·Intelligent fan speed regulation
·Self-testing when UPS startup
·50/60Hz frequency converter mode
·Multiple protection function: short-circuit, overload, overheat, battery overcharge and over discharge, output low voltage and fan fault alarm
·Multiple communication interface: RS232/RS485/USB/EPO
Dry contact port (Relay card/SNMP card/Parallel cable/Battery temperature sensor optional)
MODEL | Titanium PETA POWER 10 KVA ONLINE 3/1 |
Cabacity | 10 KVA / 10000 W |
INPUT |
|
Nominal voltage | 380/400/415Vac (3PH+N+PE) 220/230/240Vac (L+N+PE) |
Operating voltage range | 208～478Vac; 120～276Vac |
Frequency range | 40~70Hz (50/60Hz Auto-Sensing) |
Power factor | ≥0.99 |
Bypass voltage range | Max.voltage:220V:+25% (Optional+10%,15%,20%) |
OUTPUT |
|
Output voltage | 220/230/240Vac (L+N+PE) |
Power factor | 1 |
Voltage regulation | ±1% |
Output | ±1%/±2%/±4%/±5%/±10% of the rated frequency |
Crest factor | 3:1 |
Harmonic distortion (THDv) | ≤2% Linear load |
Transfer time | 0ms |
Output waveform | Pure Sinewave |
Overload | AC Mode : Load≤110%: last 60min turn to bypass; ≤125%: last 10min turn to bypass;≤150%: last 1min turn to bypass; ≥150% turn to bypass mode immediately Bat.Mode : Load≤110%: last 10min; ≤125%: last 1min; ≤150%: last 5s; ≥150%: shut down UPS immediately |
EFFICENCY |
|
EFFICENCY | 94% |
BATTERIES |
|
Battery number | ±120Vdc (20pcs 9Ah) |
Inbuilt battery | 12V/9Ah x20 |
Charging current (Max) | 1.35A |
Recharge time | 6~8 hours (to 90% of full capacity) |
INDICATORS |
|
LCD display | Input voltage,Input frequency,Output voltage,Output frequency,Load percentage, Battery voltage,Inner temperature& Remaining battery backup time |
ALARM |
|
Battery mode | Beeping every 4 seconds |
Low Battery | Beeping every second |
Overload | Beeping twice every second |
Fault | Continously beeping |
ENVIRONMENT |
|
Operating temperature | 0℃~40℃ |
Storage temperature | -25℃~55℃ |
Humidity range | 20~95%RH @ 0~40℃ (Non condensing) |
Altitude | <1500m,derating required when>1500m |
Noise level | <58dB at 1 Meter |
STANDARDS |
|
Safety | IEC/EN62040-1,IEC/EN62477-1 |
EMC | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 |
PHYSICAL |
|
Dimension W x D×H (mm) | 250×900×868 (With wheel) |
Net weight (kg) | 83 |
Specifcaions are Subject to change without prior notice | |
